Leclerc
Diana 24" 16H Computer Driven
This new 16 Shaft Loom is designed to operate either as a Table model or, with our matching 2 Treadle…
- Manufacturer
- Leclerc
Nilus II 60" Jack Loom
The Nilus II loom has been designed with a stabilizer foot, for better stability. The shed is always good with…
- Manufacturer
- Leclerc
Nilus II 45" Jack Loom
The Nilus II loom has been designed with a stabilizer foot, for better stability. The shed is always good with…
- Manufacturer
- Leclerc
Artisat 36" 8H/10T with Back Hinged Treadles
As with all Loom designs there are some tradeoffs. With the Jack Loom the problem most often cited was the…
- Manufacturer
- Leclerc
Nilus II 36" Jack loom
The Nilus II loom has been designed with a stabilizer foot, for better stability. The shed is always good with…
- Manufacturer
- Leclerc
Fanny II with Shed Regulator
Leclerc's 4 Shaft Counterbalance "Fanny" model Looms have been a favorite of Handweavers for over 60 years. There are literally…
- Manufacturer
- Leclerc
Mira II with shed regulator
A counter-balanced 4 shaft loom, with a sturdy, rigid frame, that makes it especially useful for teaching, commercial production studio…
- Manufacturer
- Leclerc
Dorothy 24" 4H
Exactly the same features as the well known Dorothy 15?" except that the weaving with is 24". FRICTION BRAKE. Side…
- Manufacturer
- Leclerc
Voyager 9.5" 8H
This new loom originally made for Workshop traveller's end up to be a practical loom for all weaver's, beginner's or…
- Manufacturer
- Leclerc
Voyager 15.75" 4H (and 8H)
Leclerc designed the Voyageur loom following demands for an 8s loom with front levers and easy portability. This 4s Voyageur has…
- Manufacturer
- Leclerc
Dorothy 15.75" 4H (and 8H)
4 SHAFT LOOM This 4 shaft table loom is collapsible for easy carrying and storage. It is a practical loom for…
- Manufacturer
- Leclerc
Leclerc 24" Table Stand with Treadles
A stand to convert your Dorothy 24" (4 shaft only) into a foot-power loom. The lams are connected to the…
- Manufacturer
- Leclerc
LeClerc Warping Mill, 22 yard
LeClerc Table model warping mill gives 2 yards per turn and can warp up to 22 yards long Not a stocked…
- Manufacturer
- Leclerc
Leclerc 24" Table Stand without Shelves
Stand for Dorothy 24", 4 or 8s OR the Voyageur 24" 4, 8, 12 or 16s The loom can…
- Manufacturer
- Leclerc
LeClerc double end
ELECTRIC BOBBIN WINDER: Hold both ends of bobbins. Designed for bobbins of any length between 1" to 8" (25 mm…
- Manufacturer
- Leclerc
LeClerc single end
ELECTRIC BOBBIN WINDER With a tapered shaft to be used on regular Leclerc 4" (10 cm) bobbins and spools.…
- Manufacturer
- Leclerc
Dorothy 15.75" Table Stand
Light folding base. The height allows weaver to use ordinary chair to operate the loom. Size open: 30.5" x 25" x…
- Manufacturer
- Leclerc
Leclerc boat shuttle, 15" - 1 in stock
Leclerc boat shuttle, 15": uses 6" bobbins.…
- Manufacturer
- Leclerc
Leclerc boat shuttle, Double Bobbin - 2 in stock
Leclerc boat shuttle, Double Bobbin - uses 2 - 4" bobbins (included)…
- Manufacturer
- Leclerc
Leclerc boat shuttle, 11" Regular - 2 in stock
Boat Shuttle with one 4" styrene bobbin used with floor looms: Regular size is: 1 3/8" x 1-3/4" x 11-1/4"; Other…
- Manufacturer
- Leclerc
Leclerc boat shuttle, 11" slim - 2 in stock
Leclerc boat shuttle, 7/8" x 1-5/8" x 11" slim - good for looms with small sheds such as table looms…
- Manufacturer
- Leclerc
Leclerc boat shuttle, 11" small - 2 in stock
Small is often used with table looms: 1-1/8" x 1-5/8" x 11" - uses 4 " bobbins. Closed…
- Manufacturer
- Leclerc
5/2 Bamboo - Daffodil -16 oz - 1 in stock
This 5/2 yarn has deep, rich colors and the unique shine and drape of bamboo. You can feel good about…
- Manufacturer
- Leclerc
5/2 Bamboo - Azure -11.5 oz - 1 in stock
This 5/2 yarn has deep, rich colors and the unique shine and drape of bamboo. You can feel good about…
- Manufacturer
- Leclerc
Heddles, 10.5",inserted eye wire, stainless, 100 pack - 5 in stock
Heddles:Inserted Eye Wire 100 per package. Reinforced eye - regular size. Measures 10 1/2 inches …
- Manufacturer
- Leclerc
Heddles, 9.5",inserted eye wire, 100 pack - 6 in stock
Heddles:Inserted Eye Wire 100 per package. Reinforced eye - regular size. Measures 9-1/2 inches high.…
- Manufacturer
- Leclerc
Leclerc Fringe Twister, Double - 1 in stock
Made of maple To ply a fringed edge, decide on the number of strands to be include and divide them into…
- Manufacturer
- Leclerc
Leclerc Plastic Bobbins/ 12 pack - 4" - 5 in stock
4" STYRENE (plastic) BOBBINS FOR BOAT SHUTTLE: 4" (10 cm) bobbins for 11-1/2" (29 cm) and 11-1/2" (30 cm) boat…
- Manufacturer
- Leclerc
Leclerc Threading Hook large - 5 in stock
Large threading hook with a wood handle - for use with looms having 8 harnesses or shafts.…
- Manufacturer
- Leclerc
Leclerc belt shuttle, 6" stick-use for inkle - 6 in stock
Leclerc: Used with simple looms or when only few rows of thread are required. The knife shape edge can be used to beat…
- Manufacturer
- Leclerc
 
|